$399.99 - $599.99
Some equipment makes your bike faster. Some makes you faster! PowerTap’s proven, 325-gram PowerTap G3 Hub does both. Make the most of your time on the bike — nail your intervals, stay within your targeted zones for long rides, and track your Training Stress Score (TSS) and Chronic Training Load (CTL) for long-term gains and reaching your goals. The low-profile G3 hub is made of light, durable aluminum with wide flange spacing for a great wheel. The G3 is accurate to within +/-1.5%, and is ANT+ capable for use with your favorite compatible cycling computer (sold separately). Plus, all the electronics are held within a small, easily removed outer cap.
CycleOps’ SuperMagneto Pro Training Kit offers smooth road-feel and four magnetic settings for dialing in the exact real-world simulation your workout calls for. The easy setting is ideal for warm ups and easy days, the road mode is tailored for high-volume rides, you can throw down hard with the interval setting and the mountain mode lets you crank out intense hill workouts even when the weather outside is nasty. Each setting has progressive resistance, where just like riding outside, resistance builds the faster the wheel spins. The frame is tough, sturdy and stable so you can ride as hard as you want. Two Climbing Riser Blocks are stackable to simulate steep grades, a RaceDay training DVD keeps you motivated, and a Training Mat and Sweat Guard protect your equipment and floor.
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
The Vortex is an interactive Smart trainer with an electro brake. This resistance unit is suitable for an average training level and can reach a maximum resistance of 950 Watt. Instead of using a handlebar computer you train by connecting the Vortex quickly and easily to the Tacx apps or third party software. Of the many possible training options, you can choose the software that best matches you and your way of training. The Vortex communicates wirelessly via ANT+ and Bluetooth® Smart for convenient training sessions using your smartphone or tablet. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the Vortex Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Electro -Realistic slope 7% 1 -Descent simulation - -Max brake power (10 sec.) 950 Watt -Sprint power (1 min.) 750 Watt -Mass inertia 11,81 kg 2 -Suitable for all bikes, if necessary with axle skewers or nuts -Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat. • Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks • Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame • Cutter sized for 1-inch standard is part #845 (sold separately) • Cutter for 1-1/8 inch standard is #846 (sold separately)
- BT-E6000(battery) / SM-BNE60 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6000 features integrated sense of design with carrier
The Rock and Roll | Smart trainer combines the world's only side-to-side free-moving fluid trainer with inRide sensor technology to put app-based power training at every rider's finger tips. With the Rock and Roll | Smart, you'll get a wide range of workout options: from intervals to threshold work to recovery spins, combined with smooth, road-like resistance. Our patented frame design provides the most comfortable stationary ride available because it allows the bike to move as it does on the road, providing less wear on the rider and a cycling-specific core workout. InRide sensor technology allows riders to connect to the Kinetic Fit app and begin a power training program. No additional on-bike sensors are needed, only a smart device that supports apps and the Bluetooth Smart communication protocol. The Kinetic inRide app keeps you on track with built-in workouts with target-effort levels tailored to individual riders and easy upload of workout data for analysis. The freedom of user-programmable displays, a built-in workout creator, and data features as rich as a power meter costing hundreds more place the Kinetic Fit app in a class of its own. Take control of your training with the Kinetic Road Machine | Smart. - Stable, durable trainer frame - Unconditional lifetime warrantly - Frame fits 22-inch to 29-inch wheels - Large diameter roller - Pairs with devices using Bluetooth Smart - Ergonomic rubberized knobs and feet - Progressive fluid resistance - Fully assembled - Folds flat for easy storage
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
Garmin's fenix 3 Performer Bundle does everything except prepare your morning brew, which you'll need a lot of if you plan on using this watch to its fullest extent. The fenix 3 is a rugged multi-sport GPS tool with features for serious training and outdoor navigation, yet it's stylish for everyday use so no one will know of your double life. Whether you're on the bike, trail running, or open water swimming, the fenix has enough metrics to satisfy any outdoor junky's data cravings. Plus, with advanced fitness metrics you'll stay on top of your game during work, recovery, and even sleep. • Stainless Steel EXO antenna with GPS + GLONASS support for fast fix and accuracy • 1.2-inch sunlight readable color Chroma display • Fitness training features include VO2 Max and Recovery Adviser • Outdoor navigation features include 3-axis compass, altimeter and barometer, TracBack and Sight’n Go • Connect IQ compatibility for customized apps, widgets, watch faces and data fields • Water rated to 100 meters
See everything in day-like light with NiteRider's Pro 3600 Enduro Remote. 4 modes allow you to choose your brightness setting up to an insanely powerful 3600 lumens thanks to a CREE LED. It stays powered from 1.5 to 16.5 hours by a quick-release Lithium-ion battery that's simple to mount and recharges via AC or USB charger in just five hours. Plus, an eight-step fuel gauge lets you see just how much battery life is left. The thumb remote keeps your hands on the bars where they belong, too.
Drawing inspiration from Pedro's Bench In a Box and Master Tool Kit, this extensive tool set includes 55 professional-quality tools packaged simply to ensure the best possible value. You won’t find a glorified fishing tackle box, but instead a wide variety of professional tools ready to tackle installations, overhauls, and repairs. The perfect kit for new shop mechanics or home enthusiasts. Includes: - L Hex Wrench Set - 9 piece - 6mm and 8mm Hex Driver - Y Wrenches - 2, 2.5, 3, 4, 5, 6 hex, T10, T25, T30 torx - L Torx Set - 7 piece - Tire Levers – Yellow (2) - Pro Chain Tool 2.0 - Equalizer Pedal Wrench - Vise Whip - Cassette Lockring Socket - Campy BB & Cassette Socket - Splined Bottom Bracket Socket - Freewheel Socket - Bottom Bracket Wrench - Cable Cutter - Cable Puller - Universal Crank Remover w/ Handle - Phillips #2 Screwdriver - Flat Blade 5.5 Screwdriver - Star Nut Setter - 1" & 1 1/8" - Magnetic Parts Tray - 13mm, 14mm, 15mm, 16mm Cone Wrench (2 Pieces Each) - 17mm, 18mm, 19mm Cone Wrench - Tape Measure - Pro Spoke Wrench - Black - Pro Spoke Wrench - Green - Pro Spoke Wrench - Red - Chain Checker Plus - Adjustable Wrench-10
- BT-E6010 (battery) / SM-BME61 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6010 features easy mounting and release
Take your indoor training to the next level with a power trainer that combines our best-in-class frame, breakthrough electronic resistance unit and data delivery to Bluetooth-connected devices for a world of training possibilities with apps like Kinetic Fit, Zwift, TrainerRoad, Rouvy, Kinomap Trainer and FulGaz. A massive flywheel delivers super-realistic road feel and the quiet, app-controlled resistance unit simulates everything from rolling hills to alpine climbs. The Road Machine | Smart Control will reinvent your indoor training experience. When you combine this powerful platform and the peace-of-mind of the industry's best warranty, the Road Machine | Smart Control system is the smart choice for any cyclist ready to take training to the next level.
Burley’s top-of-the-line single child carrier is loaded with premium features to maximize comfort, performance and safety. The Solo™ features bowed-out sides for extra shoulder room, adjustable suspension, Spring Integrated Technology (S.I.T. ™) seating to prevent tangled and limp straps, and all-kit compatibility for optional conversion from biking to strolling, jogging or skiing. Share your love for the outdoors with your little one in the Burley Solo.
Multisport GPS Watch for Fitness, Adventure, and Style Beat yesterday all day, every day. fenix 5 is the premium multisport GPS watch with wrist-based heart rate, advanced fitness features and interchangeable bands that let you go from workplace to workout without breaking stride. Whatever sport you want to track, fenix 5 has it covered, thanks to built-in activity profiles and performance metrics plus smart notifications. - Premium multisport GPS watch with Elevate wrist heart rate technology - Sapphire editions feature a scratch-resistant sapphire lens and are also Wi-Fi-enabled - Fit for adventure with rugged design that features stainless steel bezel, buttons and rear case - Put key stats at your fingertips with the performance widget that shows the effects and progress of your workouts - Connected features include smart notifications, automatic uploads to Garmin Connect online fitness community and personalization through free watch faces and apps from Garmin's Connect IQ store - Outdoor sensors, including GPS and GLONASS satellite reception and 3-axis compass with gyroscope and barometric altimeter - Battery life: up to 2 weeks in smartwatch mode (depending on settings), up to 24 hours in GPS mode or up to 60 hours in UltraTrac battery saver mode - Connectivity: Bluetooth Smart, ANT+, Wi-Fi - Charging/data cable included - Extra silicone QuickFit 22 watch band included
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power Meter System are two streamlined strain gauge monitors that can detect the slightest tangent and radial force direction as power is applied to the crank arms. This proprietary system detects the amount and the direction of force at 12 different points in each pedaling stroke for each leg, and allows you to fine tune your pedaling to find race-winning form. The Pioneer Power Meter Installation Kit comes with everything you need to package and send your existing Shimano crank to Pioneer for professional installation and calibration. - Compatible with Shimano Dura-Ace 9000 or Ultegra 6800 (Right Side Cranks Only) - Compatible Crank-arm Lengths: 165, 167.5, 170, 172.5, 175, 177.5, 180mm - Fully Integrated Strain Gauge for force measurement - Easy connectivity with ANT+ compatible Cycle Computers - HDPower Metrics when connected to Pioneer Cycle Computers - Lightweight Sensor Only 40 grams
$591.29 - $659.99
Lock your bike in, go hard, and don't make a sound? CycleOps' The Silencer Direct Drive Mag Trainer uses whisper-quiet magnets for five levels of resistance, from easy to mega-watt efforts. The wide stance ensures stability even during out-of-the-saddle sprints. With its direct drivetrain, your bike is completely locked in to maximize the secure, road-like feel. Additionally, it saves wear and tear on your rear wheel.
The Rental Cub is designed specifically for customers who offer bike trailer rentals. The double-walled, molded plastic bottom is ideal for heavy use over multiple rental seasons. The Rental Cub also features a water resistant cover and removable seat pads that make it easy to clean and turn around for the next customer. The sturdy, resilient design makes it the top choice among bike rental companies.
Soft shell bike cases with integrated bike assembly stand makes traveling with your bike simple. Exterior design with blue touch points and panel accents. - For road, mountain and cyclocross bikes up a 46" / 116.8 cm wheelbase - Rugged nylon shell expands around aluminum Click-Rail to protect bike during transport - Durable and removable side panels protect the bike - Nylon wheel bags prevent frame and wheel contact - Thru-axle adapters for 15mm and 20mm axles included - Integrated bike assembly stand doubles as a convenient bike holder and assembly stand making it easy to assemble and disassemble your bike - Integrated wheels and handles for easy transport and maneuverability - Lightweight and easy to store with folding side panels and collapsible frame Technical Specs: - Dimensions: 49.5 x 11.8 x 35 in - Inner dimensions: 49.5 x 11.75 x 35 in - Weight: 19 lb
Saddle up and prepare to workout the way you want, when you want, where you want. All you need is your bike, the Magnus, and your favorite virtual training software and device of choice. Integrated dual ANT+ FE-C and Bluetooth Smart technologies provide a quick connection to an array of virtual training software, while our fast-response electromagnetic response system puts you in control of every change in resistance, from 0 to 1500 watts. Top it off with the oh-so-sturdy Classic series indoor trainer frame, complete with CycleOps' innovative clutch knob, and you’ve got all the best features of a smart indoor trainer - without the hefty price tag. - Integrated dual ANT+ FE-C and Bluetooth 4.0 technologies. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - 1500 watt peak resistance - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0 tire. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. Optional thru-axle adapter available for 142x12mm and 148x12mm. - Trainer tire recommended. - Compatible with a wide variety of devices and virtual training application, including CycleOps VirtualTraining, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth 4.0 devices ensures the Magnus is up to date. - Cadence sensor and ANT+ stick sold separately - Does not fit 650c wheel sizes, nor all 29er tires. - All CycleOps trainers are tested to the combined weight (rider and bike) of 300 lbs.
The Garmin Edge 1030 is the ultimate GPS bike computer with navigation and connected features. - 3.5-inch bike computer with comprehensive navigation, performance and cycling awareness features - Trendline popularity routing uses billions of miles of Garmin Connect ride data to show the best on- and off-road routes - Preloaded Garmin Cycle Map provides turn-by-turn directions and new navigation alerts - New rider-to-rider messaging lets you stay in contact with other cyclists in your group - Challenge yourself every ride with newly updated preloaded Strava Live Segments feature - Battery life: up to 20 hours, extendable up to 40 hours with the optional Garmin Charge power pack General Specs: - Physical dimensions: 58 x 114 x 19 - Weight: 123 g - Water rating: IPX7 - Battery: rechargeable lithium-ion - Touchscreen - Display size: 3.5" (88.9 mm) - Display resolution: 282 x 470 pixels - Color display - Battery life: up to 20 hours In The Box: - Edge 1030 - Mounts (standard and extended out-front) - USB cable - Tether - Manuals
Garmin's Epix w/TOPO US is a high-resolution, color touchscreen GPS/GLONASS mapping watch with a worldwide, shaded relief basemap and 1-year BirdsEye Satellite Imagery subscription. Eight GB of built-in memory supports additional mapping, a TOPO US 100K map, BirdsEye Satellite Imagery and regional TOPO US 24K maps. The revolutionary, stainless steel EXO antenna combined with GPS and GLONASSS reception mean better signal strength and quicker position fixes. Use it during back country excursions, pair it with your Garmin Vector power meter, estimate your VO2 max while running, and record your average stroke rate for improved swimming efficiency. The Epix does it all. • 1.4-inch high-resolution color touchscreen • Worldwide shaded relief basemap • 8 GB built-in memory so you can load up on maps, such as TOPO U.S. 24K and BirdsEye Satellite Imagery •TOPO 100K US map includes national, state and local parks and forests, along with terrain contours, elevation information, trails, rivers, lakes and points of interest • Stainless steel EXO antenna with GPS/GLONASS reception • Altimeter, barometer and 3-axis compass
Multisport GPS Watch for Fitness, Adventure, and Style Beat yesterday all day, every day. fenix 5 is the premium multisport GPS watch with wrist-based heart rate, advanced fitness features and interchangeable bands that let you go from workplace to workout without breaking stride. Whatever sport you want to track, fenix 5 has it covered, thanks to built-in activity profiles and performance metrics plus smart notifications. - Premium multisport GPS watch with Elevate wrist heart rate technology - Fit for adventure with rugged design that features stainless steel bezel, buttons and rear case - Put key stats at your fingertips with the performance widget that shows the effects and progress of your workouts - Connected features include smart notifications, automatic uploads to Garmin Connect online fitness community and personalization through free watch faces and apps from Garmin's Connect IQ store - Outdoor sensors, including GPS and GLONASS satellite reception and 3-axis compass with gyroscope and barometric altimeter - Battery life: up to 2 weeks in smartwatch mode (depending on settings), up to 24 hours in GPS mode or up to 60 hours in UltraTrac battery saver mode - Connectivity: Bluetooth Smart, ANT+ - Charging/data cable included
Multisport GPS Watch for Fitness, Adventure, and Style Beat yesterday all day, every day. fenix 5 is the premium multisport GPS watch with wrist-based heart rate, advanced fitness features and interchangeable bands that let you go from workplace to workout without breaking stride. Whatever sport you want to track, fenix 5 has it covered, thanks to built-in activity profiles and performance metrics plus smart notifications. - Premium multisport GPS watch with Elevate wrist heart rate technology - Fit for adventure with rugged design that features stainless steel bezel, buttons and rear case - Put key stats at your fingertips with the performance widget that shows the effects and progress of your workouts - Connected features include smart notifications, automatic uploads to Garmin Connect online fitness community and personalization through free watch faces and apps from Garmin's Connect IQ store - Outdoor sensors, including GPS and GLONASS satellite reception and 3-axis compass with gyroscope and barometric altimeter - Battery life: up to 2 weeks in smartwatch mode (depending on settings), up to 24 hours in GPS mode or up to 60 hours in UltraTrac battery saver mode - Connectivity: Bluetooth Smart, ANT+ - Smartphone compatibility: iPhone, Android, Windows - Charging/data cable included
Be a better athlete today than you were yesterday with Garmin's Forerunner 735XT Tri-Bundle. This GPS running watch with multisport features is for athletes who want dialed-in data for training and a lighter load on race day. The Forerunner 735XT lets you change things up with ease thanks to built-in activity profiles for running (indoor/outdoor), cycling (indoor/outdoor), swimming (pool/open water), cross-country skiing, paddle sports, trail running, hiking and strength training. For brick workouts and du/triathlon races, the auto multisport feature lets you switch sports with just one button press. It is compatible with advanced workouts for running, cycling, and even pool swimming. Connected features like automatic uploads to Garmin Connect, the free online fitness community, let you share your stats and triumphs through social media. - Measures heart rate at the wrist so you can run freer on race day - Provides advanced dynamics for running, cycling and swimming, including ground contact time balance, stride length, vertical ratio and more - Offers VO2 max estimate, lactate threshold, race predictor and recovery advisor - Connected features: smart notifications, automatic uploads to Garmin Connect, live tracking and more - Customize with free watch faces, apps and more from our Connect IQ store
Looking for power accuracy that can handle all the grit of the trails and fit your X-12 frame? Yes? Then you've come to the right place. The PowerTap Disc Hub meets the demand for MTB-ready power meters that abide by the new standard in thru axles. A 142 x 12mm axle means a stiffer rear end, which means more power to measure with our trusted 1.5% accuracy. Or as we call it around the office: a winning combination. - Weight: 510 grams (hub); 170 grams (brake rotor) - Axle: Alloy 142 x 12mm thru axle for optimum stiffness and better power transfer - Industry best 1.5% powermeter accuracy for all your MTB'ing needs. - ANT + Compatible: Yes - Hole Count: 32 - Rotor Size: 160mm, the most common disc brake rotor - Compatibility: Shimano/SRAM - Color: Black - Field-serviceable electronics - Compatible with Bluetooth PowerCap accessory - Works with MTB frames designed for 142x12mm thru axles - 135mm endcaps included - 10 speed freehub included - You will need a Joule, Joule GPS, Joule GPS+ or other ANT+ compatible device to use this hub.
Ultra-durable, powerful battery specially designed for the rigors of mountain biking. - MTB-dedicated compact, low profile design for improved impact and vibration resistance - High capacity long-lasting Li-Ion battery of 504 Wh to cover more territory - Supported travel up to 100 km on one charge - 1,000 charge cycles with no significant power loss TECHNICAL SPECIFICATIONS - Weatherproof and waterproof - Quick charging time: 80% in 2.5 hours, from 0 to 100% in 5 hours - Computer’s LCD display shows battery capacity information based on which gear you are riding, and which support setting you are using. This helps you to easily determine current remaining battery charge. POWER-ASSIST MODES - Power-assist mode and capacity / travel distance with estimated altitude meters (based on combined rider/bike weight of 100 kg (can vary depending on usage, rider profile, riding conditions, battery life): - Boost: 50 km (400 hm) - Trail: 75 km (600 hm) - Eco: 100 km (800 hm)
Thule's RoundTrip Transition hard shell premium bike case with integrated bike work stand makes traveling with your bike simple. • The combination of ABS construction and the aluminum Click-Rail protects bike during transport • Integrated bike stand doubles as a convenient bike holder and work stand • Nylon wheel bags prevent frame and wheel contact • Integrated wheels for easy transport • Easy to pack and assemble making traveling easy • Thru axle adapters for 15mm and 20mm axles included • For road, mountain and cyclocross bikes up a 46" / 116.8 cm wheelbase
When the skies open and conspire to spit on a solid day of training, you can sit back and smile—because you're prepared with Wahoo's KICKR SNAP Bike Trainer. It was tucked tidily away in the closet with the clean sheets, just waiting for you. The SNAP keeps you in tune with ANT+ and BLE capabilities so you'll be dialed into smartphones and GPS devices simultaneously or separately. When you're cranking out the watts, the SNAP's super-stable carbon steel frame will not be moved. Your power is clocked at +/- 5% accuracy, so you'd better be sweating if you want those bragging rights. With a road feel this realistic, and access to more third party apps than any other trainer, you might even forget the great outdoors tried to soak you.
Page 1 of 2 Next page